Add: Jinsong Building, Headquater Center Yongkang City, Zhejiang Province, China
Rabby Tang: +8613735628928
MASTER TOOLS wire strip machine 1.5-38mm 400W
Strips capacity: 1.5-38mm Horizontal Motor
automatic and hand-crank driven wire stripper.
Include emergency stop button.
Suitable for various kinds of round cable and sheath flat cable.
8 round holes and 2 flat cable cut channels.
Dia 1.5-38mm wire
Gross Weight:48KGS wood case packing
Make sure the wires diameter are similar with the feeding holes,large wires in large feeding holes,small wires in small feeding holes,flat wires in flat feeding holes.
1.Push the Switch up to turn the Motor ON, Check whether the machine work well.Make sure There are no people on the output side of the machine.Comparing the cables/wires’diameters with the feeding holes on the machine,feeding the cables/wires one piece at one time.Before feeding the cables/wires,please cut off the head of the cables/wires,to avoid gaps caused to the blades.
2.On the output side,if the cuts on the cables/wires are too deep,please check below points:
①Please adjust the handles on the input side, screw down or loose them. (M12 handles)
②Check whether the cables/wires on the right position as you feeding them.
③Make sure the blades are sharp,if not,polish them with the oil stone
3.On the output side,if see the plastic(PVC)has been stripped,but the copper wires can not been disgorged,please check below 4 points:
①Check whether the springs are loose,if yes, screw down to make them tighten
②The diameter of the cables/wires are too small,please adjust the space between the two axises to 0.3-0.6mm.
③If the cables/wires you want to strip are hot,also can not get the copper wires stripped out.
4.If the cables/wires were Blocked in the arises,please check below points:
①check if the V-belts are loose.
②If the springs on the press wheels are too tight,loose them.
③There are too much oil on the cables/wires,please wipe it(make sure the machine is turned off when you wipe the arises)
We have our own factory with area around 15000square meters
Strict QC 4times examination before export
15years production and international trade experience
We can do OEM and ODM,we provide OEM for some famous companies currently
About Payment Term
Normally 30%T/T payment in advance,70%T/T after receiving copy of bill of lading
Other payment term disscuss
Accept Exwork/ FOB /CFR /CIF trade term,other trade term discuss