Add: Jinsong Building, Headquater Center Yongkang City, Zhejiang Province, China
Rabby Tang: +8613735628928
This wire stripping machine is used for removing the plastic and rubber Insulation from scrap wire,it can recycle copper wire, benefit from non-insulated pure copper wire.This machine is suitable for various types of wire, silk, wrapped in aluminum. Size can be followed by line and hole.
Dia 1.5-42mm wire
7cut channel with 10 blades inside
Multiple cut hole and Double Roller double blades cut up and down
Powerful motor 1.5KW makes it efficient to strip 1.5-42mm cables
Have extrucsion function save laber work make wire copper seperate
A:Diameter 2-5mm cables/wires’ feeding hole
B:Diameter 5-10mm cables/wires’ feeding hole
C:Diameter 10-15mm cables/wires’ feeding hole
D:Diameter 15-20mm cables/wires’ feeding hole
E:Diameter 20-25mm cables/wires’ feeding hole
F:Diameter 25-30mm cables/wires’ feeding hole
G:Diameter 30-40mm cables/wires’ feeding hole
Make sure the cables/wires’ diameter are similar with the
feeding holes ,large cables/wires in large feeding holes,small cables/wires in small feeding holes,flat Cables/wires in flat feeding holes.
1.Push the Switch up to turn the Motor ON,Check whether the machine work well.Make sure There are no people on the output side of the machine.Comparing the cables/wires’diameters with the feeding holes on the machine,feeding the cables/wires one piece at one time.Before feeding the cables/wires,please cut off the head of the cables/wires,to avoid gaps caused to the blades.
2.On the output side,if the cuts on the cables/wires are too deep,please check below points:
①、Please adjust the handles on the input side, screw down or loose them. (M12 handles)
②、Check whether the cables/wires on the right position as you feeding them.
③、Make sure the blades are sharp,if not,polish them with the oil stone
3.On the output side,if see the plastic(PVC)has been stripped,but the copper wires can not been disgorged,please check below 4 points:
①Check whether the springs are loose,if yes, screw down to make them tighten
②The diameter of the cables/wires are too small,please adjust the space between the two axises to 0.3-0.6mm.
③If the cables/wires you want to strip are hot,also can not get the copper wires stripped out.
4.If the cables/wires were Blocked in the axises,please check below points:
①、check if the V-belts are loose.
②、If the springs on the press wheels are too tight,loose them.
③、There are too much oil on the cables/wires,please wipe it(make sure the machine is turned off when you wipe the axises)
Q1:May able get a sample for testing?
A:Sure,Samples available,sample no quantity limited
Q2:May I able add my logo on the product?
A:Yes,OEM and ODM service available.
Q3:What is your quality grantee?
A:We will send you the spare parts by free if the problems caused by us.
Q4:What is your MOQ?
A:Normally we requite order value >USD4000.00 if ship via sea for the bulk order,combined models ok
Q5:What is your payment term?
A: Normally 30%T/T advance,70%T/T after receiving copy of B/L,other trade term discuss
Q6:What is your trade term?
A:Normally FOB,CFR,CIF trade term, others pls discuss
Q7:How many years that you are are have experience with this?
15years manufacturing and selling experience
Q8:Do you have any certificate for this product?
YES, CE certificate
Q9:Where your product sell to mostly?
Around 80%we sell to US,European countries, 20%to Asia market.
Q10:Can I have a visit to your factory before the order?
A:Sure,welcome to visit our factory.
Hotel booking service is available .