TEL: +8613735628928
Categories
Contact Us

Add: Jinsong Building, Headquater Center Yongkang City, Zhejiang Province, China

Mob: +8613735628928

E-mail: rabby@cnmaster-tools.com

Rabby Tang: +8613735628928

News
Home > News > Content
Drilling Machine Operating Procedures
Jul 27, 2018

1.Before the work must thoroughly check the operation of each department is normal, the rocker guide with fine cotton yarn wipe clean and according to the grade of lubricating oil injection. 

2. The rocker arm and the spindle box are locked tightly before they can be operated. 

3. There shall be no obstructions in the swing range of the rocker arm. 

4. Before drilling, the working table, workpiece, fixture and cutting tools of drilling machine must be found and fastened. 

5. Correct selection of spindle speed, the amount of feed, not overload use.

 6. The workpiece must be smooth if it exceeds the drilling table. 

7. Machine tool in operation and automatic into the knife, not to change the speed of fastening, if the speed can only be used to complete the main spindle to stop. 

8. Loading and unloading cutting tools and measuring workpiece, must be carried out in the downtime, not directly with the workpiece drilling, not wearing gloves operation.

9. Abnormal noise is found at work and must be stopped immediately to check for troubleshooting.

  • Contact Us

    Add: Jinsong Building, Headquater Center Yongkang City, Zhejiang Province, China

    Mob: +8613735628928

    E-mail: rabby@cnmaster-tools.com

    Rabby Tang: +8613735628928

  • Categories
  • Copyright © Yongkang Master Hardware & Industrial Tools Co.,Ltd All Rights Reserved.