TEL: +8613735628928
Categories
Contact Us

Add: Jinsong Building, Headquater Center Yongkang City, Zhejiang Province, China

Mob: +8613735628928

E-mail: rabby@cnmaster-tools.com

Rabby Tang: +8613735628928

News
Home > News > Content
Basic Classification Of Drilling Machines
Jul 27, 2018

The drilling machine mainly uses the drill bits to process holes (such as drilling, reaming, reaming, tapping, pinhole, etc.) on the workpiece. Machinery manufacturing and a variety of repair plant essential equipment.

According to the use and structure mainly divided into the following categories

Vertical 

The worktable and headstock can be moved vertically on the upright column for processing small and medium sized workpieces.

Desktop Short drill.

A small vertical drilling machine, the largest drilling diameter of 12~15 mm, installed on the bench to use, mostly manual drilling, commonly used to process small pieces of small holes.

ROCKER ARM Type

The spindle box can move on the rocker arm, the rocker arm can rotate and lift, the workpiece is fixed, suitable for processing large and heavy and porous workpiece, widely used in machinery manufacturing.

Deep Hole Drilling Machine

Specialized machine tools for drilling deep holes (such as barrels, barrels, and spindle parts of machine tools, etc.) that are much larger than the diameter of a hole (such as a barrel, a barrel, or a main shaft)

Vertical Drilling Machine

Conveying device (from the inside of the tool input coolant to the cutting part) and the cycle of the chip removal device.

Center Hole Drilling Machine

It is used for machining the center hole at both ends of shaft parts.

Milling and Drilling Machine

The working table can be vertically and horizontally moved, the drill shaft is vertical layout, and the drilling machine can be milled.

Horizontal Drilling Machine Spindle horizontal placement, spindle box can be moved vertically by the drilling machine. Generally more efficient than vertical drilling machine, can be multiple-side processing.


  • Contact Us

    Add: Jinsong Building, Headquater Center Yongkang City, Zhejiang Province, China

    Mob: +8613735628928

    E-mail: rabby@cnmaster-tools.com

    Rabby Tang: +8613735628928

  • Categories
  • Copyright © Yongkang Master Hardware & Industrial Tools Co.,Ltd All Rights Reserved.